Daytona Motorcycle Boots Size Guide

Not sure what size Daytona motorcycle boots you need? Daytona uses European (EU) footwear sizes, so use the chart below to find the approximate UK equivalent before choosing your boots.

This guide covers the Daytona motorcycle boots supplied in the UK by BikerHeadz, including the UK-exclusive PRO range, Roadstar PRO, TravelStar PRO, Journey PRO, M-Star PRO and Lady Star PRO, along with other touring and motorcycle racing boots.

Daytona Motorcycle Boots Size Chart — UK and EU

European (EU) Size Approximate UK Size
35 2.5–3
36 3.5–4
37 4–4.5
38 5–5.5
39 5.5–6.5
40 6–7
41 7–7.5
42 8–8.5
43 9–9.5
44 9.5–10
45 10.5–11
46 11–12
47 12–12.5
48 13–13.5

Important: UK footwear size conversions are approximate and can vary slightly between published charts. Daytona boots are labelled in EU sizes, so always use the European size when ordering. The UK equivalents above are intended as a guide, not an exact fitting guarantee.

Not every Daytona motorcycle boot is available in every size shown. The available size range depends on the model.

Daytona PRO Motorcycle Boots — UK Range

For UK riders, the Daytona PRO series is particularly relevant. These models are supplied through the official UK distribution range and include versions developed specifically for British riding conditions.

The range includes:

  • Daytona Roadstar PRO GTX: Waterproof touring boots, with standard and wider-fitting versions.
  • Daytona Roadstar PRO Air GTX: A version designed with additional ventilation for warmer riding conditions.
  • Daytona Arrow PRO Air GTX: A shorter ventilated motorcycle boot.
  • Daytona TravelStar PRO GTX: A full-height touring boot with waterproof GORE-TEX construction.
  • Daytona Journey PRO GTX: A shorter waterproof touring boot.
  • Daytona M-Star PRO GTX: A touring boot incorporating a raised internal footbed.
  • Daytona Lady Star PRO GTX: A women's touring boot with a raised internal footbed.

These models are listed in the BikerHeadz UK Daytona range. Availability of particular models and sizes can change.

Remember: The PRO designation refers to the particular boot version and its specification. It does not mean that you should choose a different EU shoe size from your normal starting size.

What About Other Daytona Motorcycle Boots?

BikerHeadz also supplies other Daytona models, including the Strive GTX, AC Classics GTX, AC Dry GTX G2, TransTourman GTX, Max Sports GTX, SL Pilot GTX and Security Evo III racing boots.

These use Daytona's European footwear sizing system, but their construction and intended use can affect how they fit.

Always check the size options for the particular model rather than assuming every boot is made in the same sizes.

How to Measure Your Feet for Daytona Boots

If you're unsure about your usual shoe size, measuring your feet is a good starting point.

  1. Stand on a sheet of paper wearing the socks you normally use for motorcycling.
  2. Keep your heel against a wall and mark the end of your longest toe.
  3. Measure the distance from the wall to the mark.
  4. Repeat the process with your other foot, as one may be slightly larger.
  5. Use the larger measurement when checking the fitting information for your chosen Daytona boots.

Foot length is useful, but the width of your foot, the height of your instep and the shape of the boot can also affect the fit.

If you're unsure which EU size your measurements correspond to, visit RaceLeathers for fitting advice rather than relying on a UK size conversion alone.

How Should Daytona Motorcycle Boots Fit?

Daytona motorcycle boots should feel secure and comfortable without squeezing your toes or creating painful pressure around your feet.

When trying them on, check that:

  • Your toes aren't pressed tightly against the front of the boots.
  • Your heel doesn't lift excessively when walking.
  • The boots fit securely around your ankles.
  • The zips, buckles or other fastenings close properly without excessive force.
  • You can comfortably operate the motorcycle's gear lever and rear brake.
  • There's enough room for the riding socks you normally wear.

Try both boots on and walk around in them. Motorcycle boots can feel different from ordinary footwear because of their reinforced soles, ankle protection and waterproof construction.

Daytona Roadstar PRO — Standard or Wide Fit?

The Daytona Roadstar PRO is available through the UK range in standard and wider-fitting versions.

Both versions use the same EU shoe size numbering. The difference is the fit around the foot, rather than the length indicated by the size number.

If you have wide feet, don't automatically order a larger size to gain extra width. This can leave too much room in front of your toes or around your heel.

Instead, consider the wider-fitting Roadstar PRO and compare it with the standard version.

At RaceLeathers, you can view the Daytona Roadstar PRO GTX and the Roadstar PRO GTX Wide Fit.

Daytona M-Star PRO and Lady Star PRO Sizing

The Daytona M-Star PRO and Lady Star PRO have raised internal footbeds designed to help riders achieve a more confident footing when stopping their motorcycle.

The M-Star PRO is supplied in EU sizes 40–45, while the Lady Star PRO is listed in EU sizes 36–39 in the BikerHeadz catalogue.

Both models use European shoe sizes, but the raised internal footbed can affect how the boots feel around your foot and ankle.

Choose your starting size using the same EU sizing system, then check the actual fit rather than ordering a larger size automatically.

You can view the Daytona M-Star PRO and Daytona Lady Star PRO at RaceLeathers.

Are Daytona Motorcycle Boots True to Size?

Daytona boots generally follow European footwear sizing, although the fit can vary between models.

The Roadstar PRO, TravelStar PRO and Journey PRO have different constructions, so the same EU size may feel slightly different between them.

The Roadstar is also available in different width fittings, which can make a considerable difference for riders with wider feet.

If you're changing from another motorcycle boot manufacturer, don't assume the same EU number will give you an identical fit.

The best approach is to use your existing footwear size as a starting point and try the Daytona boots on wherever possible.

Daytona Motorcycle Boots at RaceLeathers

RaceLeathers stocks Daytona motorcycle boots for touring, commuting and everyday road riding, including models from the UK PRO range.

Some of the models available through RaceLeathers include:

For the complete range, including other Daytona touring and motorcycle boots, browse our Daytona motorcycle boots collection.

If you're unsure about the correct size or width, visit RaceLeathers and we'll help you find a pair that fits properly.

RaceLeathers
136 Bolton Road
Darwen, Lancashire
BB3 1BZ

Opening hours: Monday to Saturday, 10am–5pm.

Get directions to RaceLeathers on Google Maps.