Dainese Motorcycle Gloves Size Guide

Not sure what size Dainese motorcycle gloves you need? Measure around the widest part of your palm, just below your knuckles, and compare your measurement with the Dainese glove size charts below.

This guide covers Dainese motorcycle gloves for men and women, including leather racing gloves, waterproof touring gloves, ventilated summer gloves and insulated winter gloves.

Important: Dainese sizes motorcycle gloves using hand circumference, not hand width or finger length. The measurements below are taken from Dainese's published sizing charts.

Dainese Men's Motorcycle Gloves Size Chart

Men's Dainese motorcycle gloves generally use letter sizes such as Small, Medium, Large and XL. The following chart includes the manufacturer's corresponding palm circumference measurements.

Glove Size Hand Circumference
3XS / XXXS 16.5 cm (6.5 inches)
2XS / XXS 17.8 cm (7 inches)
XS 19.1 cm (7.5 inches)
S 20.3 cm (8 inches)
M 21.6 cm (8.5 inches)
L 22.9 cm (9 inches)
XL 24.1 cm (9.5 inches)
2XL / XXL 25.4 cm (10 inches)
3XL / XXXL 26.7 cm (10.5 inches)

Example: If your hand circumference measures approximately 22.9 cm, Dainese's chart indicates a Large.

These measurements are the manufacturer's size reference points rather than strict minimum and maximum fitting ranges. If your measurement falls between two sizes, try both wherever possible.

Not every Dainese motorcycle glove is manufactured in every size shown.

Dainese Women's Motorcycle Gloves Size Chart

Dainese women's motorcycle gloves have their own sizing measurements, so don't assume a Medium women's glove will fit the same as a Medium men's glove.

Glove Size Hand Circumference
XS 15.2 cm (6 inches)
S 16.5 cm (6.5 inches)
M 17.8 cm (7 inches)
L 19.1 cm (7.5 inches)

Example: If your hand circumference measures approximately 17.8 cm, Dainese's women's chart indicates Medium.

Dainese's published general women's chart provides reference measurements for XS to L. Some models are also offered in XL, but the general chart does not specify an XL measurement. Check the particular glove's sizing information before ordering.

Not every women's Dainese glove is manufactured in every size shown.

How to Measure Your Hands for Dainese Gloves

You'll need a flexible tape measure. If you haven't got one, a piece of string and a ruler will do.

  1. Hold your hand out with your fingers relaxed.
  2. Wrap the tape around your palm, just below the knuckles.
  3. Keep your thumb outside the measurement.
  4. Make sure the tape is snug without pulling it tight.
  5. Read your hand circumference in centimetres.
  6. Measure both hands and use the larger measurement as your starting point.

Compare your measurement with the appropriate Dainese chart above.

Remember: You're measuring all the way around your palm, not straight across it.

How Should Dainese Motorcycle Gloves Fit?

Dainese motorcycle gloves should feel snug and secure without restricting your fingers or creating uncomfortable pressure around your knuckles.

When trying them on, check that:

  • Your fingers fit comfortably without being tightly pressed against the ends.
  • You can make a fist and grip the handlebars without excessive tightness.
  • The palm doesn't bunch up when holding the throttle.
  • Any protective knuckle armour sits correctly over your knuckles.
  • The wrist fastening holds the glove securely in place.
  • You can comfortably operate the clutch, brake and handlebar switches.

Finger length matters too. Two riders can have the same hand circumference but different finger lengths, so the chart should always be treated as a starting point.

Do Dainese Leather and Textile Gloves Fit Differently?

They can do.

Dainese produces leather racing gloves, waterproof touring gloves, lightweight summer gloves and insulated winter gloves. Different materials and construction methods can affect how each glove feels.

Leather sports and racing gloves are often designed for a closer fit, with protective components and shaped fingers intended for holding motorcycle handlebars.

Waterproof touring gloves may contain additional membranes and linings, while winter gloves can include thicker insulation.

Lightweight textile gloves often feel more flexible, but that doesn't mean they're necessarily a different size.

Don't assume that every Dainese glove will fit identically just because the size label is the same.

Will Dainese Leather Motorcycle Gloves Stretch?

Leather motorcycle gloves can soften and ease slightly with use, particularly around the palm and fingers.

However, you shouldn't rely on a tight glove stretching enough to become the correct size.

Protective knuckle components, reinforced areas and internal membranes may restrict how much the glove can change shape.

Choose gloves that fit comfortably and securely from the outset.

What If You're Between Two Dainese Glove Sizes?

If your hand circumference falls between two sizes, try both wherever possible.

A glove that's too tight can restrict movement and become uncomfortable on longer rides.

A glove that's too large may bunch around the palm or allow your fingers to move excessively inside it.

Pay attention to the fit around your knuckles, fingers and palm rather than simply choosing the nearest size on the chart.

The best choice is the glove that gives you a secure fit while allowing comfortable control of the motorcycle.

Should You Buy Larger Dainese Winter Gloves?

Not automatically.

Winter gloves need enough room for their insulation to work properly, but they must still fit securely.

Gloves that are too tight can compress the insulation and restrict circulation, potentially leaving your hands colder.

Gloves that are too large can reduce your feel for the throttle, brake and clutch.

If you're planning to wear separate thermal undergloves, try them together with the outer gloves before choosing a size.

Short or Long Dainese Motorcycle Gloves?

Dainese makes both short-cuff and long-cuff motorcycle gloves, depending on the intended riding conditions.

Shorter gloves are often chosen for everyday riding and warmer weather, while longer gloves can provide additional wrist coverage and work with sports or touring jackets.

The cuff should fit comfortably with your usual motorcycle jacket without bunching up or leaving an uncomfortable gap.

Always check how the gloves and jacket work together before riding.

Dainese Motorcycle Gloves at RaceLeathers

RaceLeathers carries motorcycle gloves for commuting, touring, sports riding and everyday motorcycling, including Dainese leather, waterproof and summer gloves when available.

Browse our men's motorcycle gloves, women's motorcycle gloves or complete motorcycle gloves collection.

If you're unsure about sizing, visit RaceLeathers and we'll help you find gloves that fit properly. It's worth bringing your usual motorcycle jacket so you can check how the cuffs fit together.

RaceLeathers
136 Bolton Road
Darwen, Lancashire
BB3 1BZ

Opening hours: Monday to Saturday, 10am–5pm.

Telephone: 01254 704000

Get directions to RaceLeathers on Google Maps.