Dainese Motorcycle Boots Size Guide

Not sure what size Dainese motorcycle boots you need? Measure your foot from heel to toe, then compare your measurement with the Dainese motorcycle boots size chart below.

This guide covers Dainese motorcycle boots for men and women, including leather racing boots, waterproof touring boots, sports boots and shorter motorcycle shoes.

Dainese generally uses European (EU) footwear sizes. The chart below also includes UK size equivalents and foot lengths in centimetres, making it easier to choose your starting size.

Dainese Motorcycle Boots Size Chart — UK and EU

The following table uses Dainese's published footwear measurements. It covers the standard Dainese boot sizing system used for both men's and women's motorcycle footwear.

EU Boot Size UK Size and Foot Length
36 UK 3.5
Foot length: 24 cm
37 UK 4.5
Foot length: 24.5 cm
38 UK 5
Foot length: 25 cm
39 UK 6
Foot length: 25.5 cm
40 UK 6.5
Foot length: 26.5 cm
41 UK 7.5
Foot length: 27 cm
42 UK 8
Foot length: 27.5 cm
43 UK 9
Foot length: 28 cm
44 UK 10
Foot length: 28.5 cm
45 UK 10.5
Foot length: 29 cm
46 UK 11.5
Foot length: 30 cm
47 UK 12
Foot length: 30.5 cm
48 UK 12.5
Foot length: 31 cm
49 UK 13.5
Foot length: 31.5 cm
50 UK 14.5
Foot length: 32 cm

Example: If you normally wear UK size 9, Dainese's standard conversion chart indicates EU 43, with a reference foot length of 28 cm.

Important: Dainese also uses a different footwear conversion chart for certain products. The figures above apply to its standard Dainese footwear chart. Always follow the size guide for your particular boots if it differs from this table.

The foot lengths are manufacturer's sizing references, not measurements of the actual boot interior. Not every Dainese motorcycle boot is available in every size shown.

How to Measure Your Feet for Dainese Boots

If you're unsure about your usual shoe size, measuring your feet is a useful starting point.

  1. Place a ruler or tape measure on the floor, starting against a wall.
  2. Put on the socks you normally wear when motorcycling.
  3. Stand with your heel against the wall and your foot resting alongside the ruler.
  4. Measure from the back of your heel to the end of your longest toe.
  5. Repeat with your other foot, as one may be slightly larger.
  6. Compare the measurement from your larger foot with the Dainese size chart above.

Don't add extra centimetres to your measurement before consulting the chart. The manufacturer has already provided the foot-length references for its sizes.

Foot length is only one part of getting the fit right. The width of your feet, height of your instep and shape of the boots also matter.

Dainese Women's Motorcycle Boots Sizing

Dainese produces motorcycle boots designed specifically for women riders, including racing, touring and shorter everyday styles.

The manufacturer's standard footwear chart uses the same EU and UK size conversions for men's and women's boots.

However, women's motorcycle boots may have different proportions around the foot, ankle and calf.

This means the same EU size can feel different between men's and women's designs.

Use the chart above as your starting point, then check the fit of your chosen boots. Some women's models may also be offered in sizes outside the range covered by the standard chart.

How Should Dainese Motorcycle Boots Fit?

Your Dainese motorcycle boots should feel secure without squeezing your toes or creating uncomfortable pressure around your feet.

When trying them on, check that:

  • Your toes aren't pressed tightly against the front of the boots.
  • There is enough room to move your toes comfortably.
  • Your heel doesn't lift excessively when walking.
  • The boots fit securely around your ankles.
  • Any ankle protection sits in the correct position.
  • The zips, laces, buckles or other fastenings close comfortably.
  • You can operate your motorcycle's gear lever and rear brake without restriction.

Try both boots on and walk around in them. Ideally, check how they feel when sitting on your motorcycle.

Motorcycle boots often feel more structured than ordinary footwear because of their reinforced soles and protective components.

Do Dainese Racing and Touring Boots Fit Differently?

They can do.

Dainese racing boots are generally designed to provide a secure fit around the foot and ankle, with protective components that support the rider when using the motorcycle's controls.

Touring boots may provide a different balance of protection, flexibility and walking comfort.

Waterproof touring boots can also have internal membranes and linings that affect how much room you feel inside the boot.

Shorter motorcycle boots and riding shoes may feel more flexible, particularly around the ankle.

Don't assume that every Dainese boot will fit identically simply because the size number is the same.

What If You're Between Two Dainese Boot Sizes?

If your measurements fall between sizes, try both neighbouring sizes wherever possible.

Boots that are too small can place uncomfortable pressure on your toes and the widest part of your feet.

Boots that are too large may allow your feet to move excessively, making it harder to operate the motorcycle's controls comfortably.

Don't automatically choose a larger size to accommodate thick socks, and don't expect a tight motorcycle boot to stretch enough to become comfortable.

The correct size should fit securely while allowing enough room for your feet and the socks you normally wear.

Should Motorcycle Trousers Go Inside or Outside Dainese Boots?

That depends on the design of the boots and trousers.

Most waterproof touring trousers are intended to sit over the outside of motorcycle boots, helping rainwater run down over the boot rather than into the opening at the top.

Some Dainese racing footwear is designed to work with particular leather suits, including designs where the suit covers the outside of the boots.

Other racing boots are designed to be worn over the trouser legs.

Always follow the manufacturer's instructions for your particular boots and trousers.

Make sure the arrangement doesn't restrict movement, interfere with protective components or prevent fastenings from closing correctly.

Will Dainese Motorcycle Boots Stretch?

Leather motorcycle boots may soften slightly with use, particularly around areas that flex when walking or operating the motorcycle's controls.

However, reinforced toes, protective ankle structures and waterproof membranes may limit how much the boot can change shape.

Don't rely on a motorcycle boot stretching enough to correct an unsuitable size.

Choose boots that fit properly from the outset rather than expecting painful pressure points to disappear after several rides.

Dainese Motorcycle Boots at RaceLeathers

RaceLeathers carries Dainese motorcycle boots for commuting, touring, sports riding and everyday motorcycling.

Our selection includes protective racing boots, waterproof touring boots and shorter motorcycle footwear for men and women riders.

Browse our men's motorcycle boots, women's motorcycle boots or complete motorcycle boots collection.

If you're unsure about sizing, visit RaceLeathers and we'll help you find motorcycle boots that fit properly. Bring your usual motorcycle socks and trousers so you can check how everything fits together.

RaceLeathers
136 Bolton Road
Darwen, Lancashire
BB3 1BZ

Opening hours: Monday to Saturday, 10am–5pm.

Telephone: 01254 704000

Get directions to RaceLeathers on Google Maps.